[fpc-pascal] Serial to TCP gateway in FPC?

[Snorkl e]

Synapse and fpc works great with serial port, I have a daemon I wrote 4
years ago that reads serial data from a phone PBX runs 24X7 and never an
issue.

On Jun 18, 2017 11:17 AM, "Bo Berglund" <bo.berglund at gmail.com> wrote:

> On Sun, 18 Jun 2017 09:46:06 -0500, Snorkl e
> <tony.caduto at gmail.com> wrote:
>
> >Couldn't you read the serial port data and then stream it with Synapse to
> >the remote location?
> >You can use Synapse to read the serial port data and sent via TCP/IP.
> >
>
> Probably, but I was hoping for some ready-made example to get going a
> bit faster...
> I did another piece of software a year or so ago only involving
> TCP/IP, also for remote control, but then I used an Indy TCP client
> component.
> My problem is getting my head around serial port handlers, which I
> have so-so experience of in the past. No RS232 work with FPC/Lazarus
> earlier and in Delphi I used AsyncPro components, but these are so
> complex that one is lost amongst all properties to set...
>
> I would like a dead simple serial component where I could just specify
> the comm parameters (baud, start/stop bits, handshaking and port) then
> just open the connection and wait for receive *events*.
>
> Yes, it is easier for me to have components with event generation on
> data reception rather than using blocking components, which I must
> make threads for and then figure out how to channel the data from the
> thread into the main application...
>
>
> --
> Bo Berglund
> Developer in Sweden
>
> _______________________________________________
> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freepascal.org/pipermail/fpc-pascal/attachments/20170618/3226b89f/attachment.html>