[fpc-devel] [Fwd: Re: Specific RTL for embedded target]

Tomas Hajny XHajT03 at hajny.biz
Thu Nov 12 16:40:22 CET 2015


Hello,

I'm forwarding the response to the original poster directly (in Cc:) since
he is not subscribed to the mailing list (unfortunately, he hasn't
mentioned so in his post).

Tomas
(one of the FPC mailing list moderators)

---------------------------- Original Message ----------------------------
Subject: Re: [fpc-devel] Specific RTL for embedded target
From:    "Georg Hieber" <georg at ghgrp.com>
Date:    Thu, November 12, 2015 16:19
To:      "FPC developers' list" <fpc-devel at lists.freepascal.org>


Simon,

what you are referring to is mostly not the RTL (which is a standardized
set of routines necessary to "make pascal work"). but are device drivers
that provide a link between the RTL and the underlying hardware, tasks
that in a non - embedded environment are performed by the operating system.

An example: the procedure "write / writeln" is part of the RTL. it does
all the formatting, calls conversion routines where necessary (from
numerical formats to string), and so on - but finally passes the
formatted sequence of characters to the operating system's file I/O,
which forma an intermediate layer, and finally calls the appropriate
device drivers (serial, console, disk, ....).

I completely agree with you that such a library would be highly
desirable, but it is a different thing than the RTL.

One exception: string functions, these are part of the RTL. for the AVR,
I am working on a unit system, that is mainly writen in assembler.

best regards,
Georg

Am 11.11.2015 um 18:06 schrieb Simon Ameis:
> Hello,
>
> does anyone work on a library (embedded RTL) for basic embedded
> microcontroller units (MCU) like AVR or ARM?
> I think, there should be a stable interface along different MCUs for
> accessing various hardware interfaces.
>
> * MCU compatible/optimized string functions
> * I2C
> * SPI
> * GPIO
> * Analog Inputs/Outputs
> * PWM
> * UART
> * Timer
> * Watchdog timers
>
>
> These topics are much more dependant on the individual MCU families. It
> would be great to have a cross MCU API though.
> * MCU setup
> * Power Management
>
> As there are some libraries out there on the net, they could inspire the
> design of the embedded RTL.
> Are there any concerns on translating one library as long as it has a
> less restrictive license than modified LGPL used by the default RTL
> (e.g. BSD license)?
>
> Kind Regards
> Simon Ameis
>
> _______________________________________________
> fpc-devel maillist  -  fpc-devel at lists.freepascal.org
> http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel





More information about the fpc-devel mailing list