[fpc-pascal] Error building FPC 3.0.2 from svn sources on RPi3

[Paul Breneman]

On 06/04/2017 07:10 AM, Paul Breneman wrote:
> On 06/04/2017 02:02 AM, Bo Berglund wrote:
>> On Tue, 30 May 2017 17:49:03 +0200, Giuliano Colla
>> <giuliano.colla at fastwebnet.it> wrote:
>>
>>> Il 29/05/2017 23:28, Bo Berglund ha scritto:
>>>
>>>> I have bought and initialized a new RPi3 today. It runs Raspbian
>>>> Jessie PIXEL latest version.
>>> I don't know what you're going to use your RPi3 for, but just in case,
>>> are you aware that now you can install an RT_PREEMPT kernel, and enjoy
>>> the real-time patch low latencies?
>>>
>> This new RPi3 is meant for experimenting with GIT usage (our version
>> system otherwise is CVS).
>> But I also have other systems where a real time system would be handy.
>> Do you have more info on this?
>>
> 
>  From this page:
> http://turbocontrol.com/devoptions.htm
> 
> You might want to check out:
> http://www.machinekit.io/
> and
> http://rtxi.org/
> 
> Regards,
> Paul
> www.ControlPascal.com
> _______________________________________________

You might want to try the BeagleBone Black as it might be better for 
real-time machine control (and boots up in a more standard way) than the 
Raspberry Pi?  That is what was determined by a friend (of a friend) who 
helps with Machine Kit a lot.