[fpc-pascal] [OT] Pascal compiler for embedded platforms

Rainer Stratmann RainerStratmann at t-online.de
Tue Mar 19 00:29:16 CET 2013


I am not sure, but I think that is not possibe.
For me I don't need debugger.

Am Tuesday 19 March 2013 00:05:39 schrieb Justin Smyth:
> Does that allow debugging via Lazarus ?
>
> -----Original Message-----
> From: "Rainer Stratmann" <RainerStratmann at t-online.de>
> Sent: ‎19/‎03/‎2013 9:29 AM
> To: "FPC-Pascal users discussions" <fpc-pascal at lists.freepascal.org>
> Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms
>
> I had my own (simple) board Jeppe gave me an upload program written by his
> own which works perfect.
> May be you can ask him. He is the specialist for that stuff.
>
> Am Sunday 17 March 2013 10:08:19 schrieb Justin Smyth:
> > Rainer what board were using using for this below ?
> >
> > -----Original Message-----
> > From: Rainer Stratmann
> > Sent: Saturday, March 16, 2013 7:15 PM
> > To: FPC-Pascal users discussions
> > Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms
> >
> > May be you can use STM32F...
> >
> > That works for me with FPC.
> > http://j-software.dk/stm32f103.php
> >
> > Am Saturday 16 March 2013 03:13:52 schrieb Justin Smyth:
> > > I'm using a LPC 1343 Microcontroller unit from waveshare, basically its
> > > a Cortex M3.
> > >
> > > the link for the board is -
> > > http://www.wvshare.com/product/Open1343-Package-A.htm
> > >
> > > I've now got STLInk V2 debugging kit , i want to debug this board in
> > > lazarus
> > >
> > >
> > > KInd Regards
> > >
> > > Justin
> > >
> > > -----Original Message-----
> > > From: Rainer Stratmann
> > > Sent: Saturday, March 16, 2013 6:28 AM
> > > To: FPC-Pascal users discussions
> > > Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms
> > >
> > > What kind of controller?
> > > Atmel AVR 8 bit?
> > > ARM 32 bit?
> > >
> > > For AVR it works good.
> > >
> > > Am Friday 15 March 2013 13:29:48 schrieb Justin Smyth:
> > > > I've tried to use mikropascal and not had any luck , i emailed them
> > > > my board i was going to use with the product and they said they didnt
> > > > support it.
> > >
> > > may be in the future...
> > >
> > > > I've now got a ST Link V2 for the debugging , if someone could give
> > > > me an
> > > > idea how to set it up  , i would be great full.
> > > >
> > > > Kind Regards
> > > >
> > > >
> > > > Justin Smyth
> > > >
> > > > -----Original Message-----
> > > > From: Rainer Stratmann
> > > > Sent: Friday, March 15, 2013 9:30 PM
> > > > To: FPC-Pascal users discussions
> > > > Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms
> > > >
> > > > Am Friday 15 March 2013 10:40:15 schrieb Roberto P.:
> > > > > 2013/3/15 Rainer Stratmann <RainerStratmann at t-online.de>
> > > > >
> > > > > > For 32 bit ARM I would try to use freepascal.
> > > > > > I got it work somehow.
> > > > >
> > > > > any tip or guide would be appreciated, then.
> > > >
> > > > For me that is not easy. Most of the time I get it work somehow and
> > > > shortly
> > > > after I did not realize why ... :-)
> > > > I have suggestions to make something easier, but I am always facing
> > > > excuses
> > > > why it is good as it is, so I less take part of this type of
> > > > discussions which are exhausting for me.
> > > >
> > > > > > > I'm just a little afraid of the potentially limited maturity of
> > > > > > > these.
> > > > > >
> > > > > > What do you mean exactly with that?
> > > > >
> > > > > I mean that (maybe) both FPC and mikroePascal are young products
> > > > > for the embedded world, so that I might be facing compiler or 
> > > > > library propblems during the devlopment, besides my own project
> > > > > problems.
> > > >
> > > > May be mikroe is not providing the sourcecode (I am not sure), but
> > > > they have for nearly everything a solution. Ethernet, FAT, SPI,
> > > > SD-Card, USB, HTTP, TCP, etc...
> > > > There were problems in the past, but because they are (heavily) busy
> > > > with
> > > > that
> > > > stuff they solve most of the important problems. And I think they are
> > > > honest.
> > > > _______________________________________________
> > > > fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> > > > http://lists.freepascal.org/mailman/listinfo/fpc-pascal
> > > >
> > > >
> > > > _______________________________________________
> > > > fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> > > > http://lists.freepascal.org/mailman/listinfo/fpc-pascal
> > >
> > > _______________________________________________
> > > fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> > > http://lists.freepascal.org/mailman/listinfo/fpc-pascal
> > >
> > >
> > > _______________________________________________
> > > fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> > > http://lists.freepascal.org/mailman/listinfo/fpc-pascal
> >
> > _______________________________________________
> > fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> > http://lists.freepascal.org/mailman/listinfo/fpc-pascal
> >
> >
> > _______________________________________________
> > fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> > http://lists.freepascal.org/mailman/listinfo/fpc-pascal
>
> _______________________________________________
> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> http://lists.freepascal.org/mailman/listinfo/fpc-pascal





More information about the fpc-pascal mailing list