[fpc-pascal] [OT] Pascal compiler for embedded platforms

[Justin Smyth]

I have downloaded openocd and will install it and setup the gdb side of it. 

Not sure when could be today or tomorrow 

-----Original Message-----
From: "Michael Ring" <mail at michael-ring.org>
Sent: ‎17/‎03/‎2013 1:09 AM
To: "FPC-Pascal users discussions" <fpc-pascal at lists.freepascal.org>
Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms

Those two links may help:

The first article references the 2nd:

http://www.eevblog.com/forum/beginners/help-on-arm-cortex-m3-development-tools-ide/20/?wap2

https://github.com/mossmann/hackrf/wiki/LPC43xx-Debugging

Michael

Am 16.03.13 03:13, schrieb Justin Smyth:
> I'm using a LPC 1343 Microcontroller unit from waveshare, basically 
> its a Cortex M3.
>
> the link for the board is - 
> http://www.wvshare.com/product/Open1343-Package-A.htm
>
> I've now got STLInk V2 debugging kit , i want to debug this board in 
> lazarus
>
>
> KInd Regards
>
> Justin
>
> -----Original Message----- From: Rainer Stratmann
> Sent: Saturday, March 16, 2013 6:28 AM
> To: FPC-Pascal users discussions
> Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms
>
> What kind of controller?
> Atmel AVR 8 bit?
> ARM 32 bit?
>
> For AVR it works good.
>
> Am Friday 15 March 2013 13:29:48 schrieb Justin Smyth:
>> I've tried to use mikropascal and not had any luck , i emailed them my
>> board i was going to use with the product and they said they didnt 
>> support
>> it.
> may be in the future...
>>
>>
>> I've now got a ST Link V2 for the debugging , if someone could give 
>> me an
>> idea how to set it up  , i would be great full.
>>
>> Kind Regards
>>
>>
>> Justin Smyth
>>
>> -----Original Message-----
>> From: Rainer Stratmann
>> Sent: Friday, March 15, 2013 9:30 PM
>> To: FPC-Pascal users discussions
>> Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms
>>
>> Am Friday 15 March 2013 10:40:15 schrieb Roberto P.:
>> > 2013/3/15 Rainer Stratmann <RainerStratmann at t-online.de>
>> >
>> > > For 32 bit ARM I would try to use freepascal.
>> > > I got it work somehow.
>> >
>> > any tip or guide would be appreciated, then.
>>
>> For me that is not easy. Most of the time I get it work somehow and 
>> shortly
>> after I did not realize why ... :-)
>> I have suggestions to make something easier, but I am always facing 
>> excuses
>> why it is good as it is, so I less take part of this type of discussions
>> which are exhausting for me.
>>
>> > > > I'm just a little afraid of the potentially limited maturity of
>> > > > these.
>> > >
>> > > What do you mean exactly with that?
>> >
>> > I mean that (maybe) both FPC and mikroePascal are young products 
>> for the
>> > embedded world, so that I might be facing compiler or library 
>> propblems
>> > during the devlopment, besides my own project problems.
>>
>> May be mikroe is not providing the sourcecode (I am not sure), but they
>> have for nearly everything a solution. Ethernet, FAT, SPI, SD-Card, USB,
>> HTTP, TCP, etc...
>> There were problems in the past, but because they are (heavily) busy 
>> with
>> that
>> stuff they solve most of the important problems. And I think they are
>> honest.
>> _______________________________________________
>> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
>> http://lists.freepascal.org/mailman/listinfo/fpc-pascal
>>
>>
>> _______________________________________________
>> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
>> http://lists.freepascal.org/mailman/listinfo/fpc-pascal
>
>
> _______________________________________________
> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> http://lists.freepascal.org/mailman/listinfo/fpc-pascal
>
> _______________________________________________
> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> http://lists.freepascal.org/mailman/listinfo/fpc-pascal
>

_______________________________________________
fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-pascal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freepascal.org/pipermail/fpc-pascal/attachments/20130317/28041d47/attachment.html>