[fpc-pascal] ARM STM32F Processor

[Roberto P.]

2011/9/19 Jeppe Græsdal Johansen <jjohan07 at student.aau.dk>

>  Den 19-09-2011 22:20, Roberto P. skrev:
>
> Hi,
>
> I think you can get an unbranded (no IAR, no Keil, etc...) flash
> programming tool with a simple (but working) software from ST for about 30
> euros.
> Look here:  http://www.st.com/internet/evalboard/product/251168.jsp
>
> R#
>
> I'm pretty sure it's still the same closed(and botched) protocol that's
> used, as in the ST-Link emulator on the STM32-Discovery, meaning you can
> only program the target using the ST endorsed IDE's
>
> _______________________________________________
> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> http://lists.freepascal.org/mailman/listinfo/fpc-pascal
>


Hmm... no, you can develop any board of yours and by bringing out the VCC,
GND and JTAG signals you can connect to the ST-LINK/V2 from ST, which I
bought for 28 euros.
Then you can download the  STM32 ST-LINK utility  from the web page I wrote
before and flash any program in binary, Intel Hex or Motorola S-Record
format. It has a graphic and a command-line interface.... pretty near to
perfect, for me.

R#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freepascal.org/pipermail/fpc-pascal/attachments/20110923/abe7f3fe/attachment.html>