[fpc-pascal] Linux serial interface

[Rainer Stratmann]

Am Dienstag, 26. Dezember 2006 14:32 schrieb Johann Glaser:
> Hi!
>
> Am Dienstag, den 26.12.2006, 15:38 +0100 schrieb Rainer Stratmann:
> > Am Dienstag, 26. Dezember 2006 14:07 schrieb Michael Van Canneyt:
> > > On Tue, 26 Dec 2006, Rainer Stratmann wrote:
> > > > How to open correct the serial interface ('/dev/ttyS0')
> > >
> > > As far as I know, this is a terminal, so the terminal emulator will
> > > mess up the IO. You should open the raw device.
> >
> > Isn't tty1 (without S) a terminal?
>
> The ttySx devices also do a lot of terminal emulation stuff internally
> (see e.g. stty(1) for how many things are possible, in your program you
> have to do these with ioctl()).
how to do that?
> Especially I have made the observation that flow control often is in
> your way when you "just want to transmit data". Switch off flow control
> completely (neither hardware nor software/XON/XOFF). Probably your
> USB-serial converter has different default values for this and this is
> why your program works with it.
do you have little example code?
thanks
Rainer
> Bye
>   Hansi
>
>
> _______________________________________________
> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> http://lists.freepascal.org/mailman/listinfo/fpc-pascal