[fpc-devel] FPC / Lazarus ARM Embedded Debuging

[Justin Smyth]

So bascially the only option is to get either the st Link V2 or ARM USB TINY-H , would something like this work ?

http://au.element14.com/stmicroelectronics/st-link/icd-programmer-for-stm8-stm32/dp/1779159

Kind Regards


Justin

From: Michael Ring 
Sent: Thursday, March 14, 2013 12:25 AM
To: FPC developers' list 
Subject: Re: [fpc-devel] FPC / Lazarus ARM Embedded Debuging

I fould the following announcement:

http://article.gmane.org/gmane.comp.debugging.openocd.devel/17362

So ulink is supported by openocd, not sure if ulink2 is compatible with ulink.

from what I have googled about ulink2 it seems that it is closely bound to the uVision Debugger from Keil and they do not seem to provide a gdbserver.

So if ulink support in openocd does not work for you I would propose that you spend approx. 25 Euros and buy a stlink V2 interface or ARM-USB-TINY-H from Olimex (€40),
I own both and they work just fine with openocd.

I have no plans to make ulink2 work, I have created an interface for openocd (which provides a gdbserver) that can be used to interface with different jtag debugging interfaces. http://openocd.sourceforge.net/

Michael

Am 13.03.13 13:16, schrieb Justin Smyth:

  Sorry of this cross posts but i wasn't sure where to send this question to. 

  I am currently using a LPC 1343 Microprocessor board and i have recently purchased a ULINK2 debugging kit from china. 

  i am aware that there are plans to allow debugging these boards using the UNLINK2, but it wasnt something that is currently available 

  could i get some help so i can use the UNLINK2 device to debug my board , i want to be able to write some code in lazarus , upload it to the board and debug it 

  I do believe micheal ring was talking bout this 

  Kind Regards 


  Justin 

  ps if you get this and email me back you prob wont get any replies for 8 or so hours as its after 11pm here in Melbourne AU , i'm off to bed need some sleep. 

  _______________________________________________ 
  fpc-devel maillist  -  fpc-devel at lists.freepascal.org 
  http://lists.freepascal.org/mailman/listinfo/fpc-devel 






--------------------------------------------------------------------------------
_______________________________________________
fpc-devel maillist  -  fpc-devel at lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freepascal.org/pipermail/fpc-devel/attachments/20130314/1fcc17d7/attachment.html>