[fpc-devel] Synapse hangs in ARM-Linux
Michael Schnell
mschnell at lumino.de
Wed Jan 30 10:04:12 CET 2013
On 01/28/2013 08:03 PM, waldo kitty wrote:
>
> i'm trying to make sure i'm following along here because i'm also
> using synapse for a project...
Do you know where to find the Synapse "Powers" ? I do hope (and feel)
they are interested in helping to make this work and fix potential
problems in the Synapse code.
This is why I upgraded to the most recent svn sources of Synapse (and
found that it obviously is not yet tested on ARM: it does not compiled
without a (simple) modification).
Here are my latest finding:
- I set the ConnectTimeout property and I set the other timeouts by
calling "SetTimeout".
- As described my project does perform two complete HTTP
communications with the target successfully.
- With the third access, the "connect" does work even without a
timeout and a retry performed by my software (Synapse Status log: "7" =
HR_CanWrite / "5" = HR_Connect).
- then it does "11" = HR_WriteCount is shown, supposedly indicating my
write request. and "13" = HR_Error seems shows that a timeout error on
that Write occurred.
- my latest log shows that the timeout occurs after more than 15
Minutes (see below).
- my software does a retry and the same happens again.
Now the "extended" Timeout is one problem, but the primary problem is
why this write HTTP access does not work, while the previous two
accesses do work fine.
How do we proceed ?
Thanks,
-Michael
------------------------------------------------------------------------
>>>29-1-13 23:00:13>>>3:
>>>29-1-13 23:00:13>>>0:192.168.71.252:80
>>>29-1-13 23:00:13>>>1:192.168.71.252:80
>>>29-1-13 23:00:13>>>2:IPv4
>>>29-1-13 23:00:13>>>7:
>>>29-1-13 23:00:13>>>5:192.168.71.252:80
>>>29-1-13 23:16:37>>>11:5616
>>>29-1-13 23:16:37>>>13:110,Connection timed out
>>>29-1-13 23:16:37>>>6:
>>>29-1-13 23:16:37>>>10:5663
>>>29-1-13 23:16:37>>>3:
>>>29-1-13 23:16:37>>>0:192.168.71.252:80
>>>29-1-13 23:16:37>>>1:192.168.71.252:80
>>>29-1-13 23:16:37>>>2:IPv4
>>>29-1-13 23:16:37>>>7:
>>>29-1-13 23:16:37>>>5:192.168.71.252:80
>>>29-1-13 23:33:12>>>11:5382
>>>29-1-13 23:33:12>>>13:110,Connection timed out
>>>29-1-13 23:33:12>>>6:
>>>29-1-13 23:33:12>>>10:5638
>>>29-1-13 23:33:12>>>3:
>>>29-1-13 23:33:12>>>0:192.168.71.252:80
>>>29-1-13 23:33:12>>>1:192.168.71.252:80
>>>29-1-13 23:33:12>>>2:IPv4
>>>29-1-13 23:33:12>>>7:
>>>29-1-13 23:33:12>>>5:192.168.71.252:80
>>>29-1-13 23:48:47>>>11:4095
>>>29-1-13 23:48:47>>>13:110,Connection timed out
>>>29-1-13 23:48:47>>>6:
>>>29-1-13 23:48:47>>>10:498
>>>29-1-13 23:48:47>>>3:
>>>29-1-13 23:48:47>>>0:192.168.71.252:80
>>>29-1-13 23:48:47>>>1:192.168.71.252:80
>>>29-1-13 23:48:47>>>2:IPv4
>>>29-1-13 23:48:47>>>7:
>>>29-1-13 23:48:47>>>5:192.168.71.252:80
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freepascal.org/pipermail/fpc-devel/attachments/20130130/92bc128e/attachment.html>
More information about the fpc-devel
mailing list