[fpc-devel] fpc on arm-linux-uclibc and OABI

[Nataraj S Narayan]

Hi

Same problem with "arm-none-linux-gnueabi-" toolachain from
Codesourcery also, which i presume is not uclibc based. Using this
toolchain for kernel compilation,

regards

Nataraj

On Mon, Mar 1, 2010 at 12:18 PM, Nataraj S Narayan <natarajsn at gmail.com> wrote:
> Florian
>
> Getting this kinda errors when using:-
>
> # gmake distclean crosszipinstall CPU_TARGET=arm OS_TARGET=linux
> CROSSOPT='-dFPC-ARMEL '
>
> without -CfSoft -darm. I am on "arm-linux-uclibcgnueabi-" symlinked to
> arm-linux-  toolchain.
>
> regards
>
> Nataraj
>
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:43638:
> Error: selected processor does not support `stfd f0,
> [r13,#4]'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:43639:
> Error: selected processor does not support `ldfd f0,
> [r13,#4]'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45253:
> Error: selected processor does not support `fltd f1,
> r0'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45256:
> Error: selected processor does not support `ldfltd f
> 0,[r0]'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45257:
> Error: selected processor does not support `adfltd f
> 1,f0,f1'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45259:
> Error: selected processor does not support `ldfd f0,
> [r0]'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45260:
> Error: selected processor does not support `mufd f1,
> f1,f0'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45261:
> Error: selected processor does not support `mvfd f0,
> f1'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55571:
> Error: selected processor does not support `sfm f4,1
> ,[r11,#-316]'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55576:
> Error: selected processor does not support `stfd f0,
> [r11,#-304]'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55577:
> Error: selected processor does not support `ldfd f4,
> [r11,#-304]'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55597:
> Error: selected processor does not support `mvfd f0,
> f4'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55607:
> Error: selected processor does not support `lfm f4,1
> ,[r11,#-316]'
> /usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:57015:
> Error: selected processor does not support `stfd f0,
> [r5]'
> system.pp(380) Error: Error while assembling exitcode 1
> system.pp(380) Fatal: There were 2 errors compiling module, stopping
> Fatal: Compilation aborted
> gmake[5]: *** [system.ppu] Error 1
> gmake[5]: Leaving directory `/usr/home/nataraj/software/fpc/rtl/linux'
> gmake[4]: *** [fpc_smart] Error 2
> gmake[4]: Leaving directory `/usr/home/nataraj/software/fpc/rtl/linux'
> gmake[3]: *** [linux_smart] Error 2
> gmake[3]: Leaving directory `/usr/home/nataraj/software/fpc/rtl'
> gmake[2]: *** [rtl_smart] Error 2
> gmake[2]: Leaving directory `/usr/home/nataraj/software/fpc'
> gmake[1]: *** [build-stamp.arm-linux] Error 2
> gmake[1]: Leaving directory `/usr/home/nataraj/software/fpc'
> gmake: *** [crosszipinstall] Error 2
>
>
>
> On Sat, Feb 27, 2010 at 10:03 PM, Florian Klämpfl
> <florian at freepascal.org> wrote:
>>
>> On Sat, 27 Feb 2010 19:17:48 +0530, Nataraj S Narayan <natarajsn at gmail.com>
>> wrote:
>>> Jonas
>>>
>>>
>>> #make distclean crosszipinstall CPU_TARGET=arm CROSSOPT='-CfSOFT -darm
>>> -dFPC-ARMEL -gl'
>>
>> As I said multiple times, only OPT=-dFPC_ARMEL is needed. No -CfSOFT, no
>> -darm, especially not in CROSSOPT.
>> _______________________________________________
>> fpc-devel maillist  -  fpc-devel at lists.freepascal.org
>> http://lists.freepascal.org/mailman/listinfo/fpc-devel
>>
>