[fpc-devel] fpc on arm-linux-uclibc and OABI

[Nataraj S Narayan]

Florian

Getting this kinda errors when using:-

# gmake distclean crosszipinstall CPU_TARGET=arm OS_TARGET=linux
CROSSOPT='-dFPC-ARMEL '

without -CfSoft -darm. I am on "arm-linux-uclibcgnueabi-" symlinked to
arm-linux-  toolchain.

regards

Nataraj

/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:43638:
Error: selected processor does not support `stfd f0,
[r13,#4]'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:43639:
Error: selected processor does not support `ldfd f0,
[r13,#4]'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45253:
Error: selected processor does not support `fltd f1,
r0'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45256:
Error: selected processor does not support `ldfltd f
0,[r0]'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45257:
Error: selected processor does not support `adfltd f
1,f0,f1'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45259:
Error: selected processor does not support `ldfd f0,
[r0]'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45260:
Error: selected processor does not support `mufd f1,
f1,f0'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:45261:
Error: selected processor does not support `mvfd f0,
f1'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55571:
Error: selected processor does not support `sfm f4,1
,[r11,#-316]'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55576:
Error: selected processor does not support `stfd f0,
[r11,#-304]'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55577:
Error: selected processor does not support `ldfd f4,
[r11,#-304]'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55597:
Error: selected processor does not support `mvfd f0,
f4'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:55607:
Error: selected processor does not support `lfm f4,1
,[r11,#-316]'
/usr/home/nataraj/software/fpc/rtl/units/arm-linux/system.s:57015:
Error: selected processor does not support `stfd f0,
[r5]'
system.pp(380) Error: Error while assembling exitcode 1
system.pp(380) Fatal: There were 2 errors compiling module, stopping
Fatal: Compilation aborted
gmake[5]: *** [system.ppu] Error 1
gmake[5]: Leaving directory `/usr/home/nataraj/software/fpc/rtl/linux'
gmake[4]: *** [fpc_smart] Error 2
gmake[4]: Leaving directory `/usr/home/nataraj/software/fpc/rtl/linux'
gmake[3]: *** [linux_smart] Error 2
gmake[3]: Leaving directory `/usr/home/nataraj/software/fpc/rtl'
gmake[2]: *** [rtl_smart] Error 2
gmake[2]: Leaving directory `/usr/home/nataraj/software/fpc'
gmake[1]: *** [build-stamp.arm-linux] Error 2
gmake[1]: Leaving directory `/usr/home/nataraj/software/fpc'
gmake: *** [crosszipinstall] Error 2



On Sat, Feb 27, 2010 at 10:03 PM, Florian Klämpfl
<florian at freepascal.org> wrote:
>
> On Sat, 27 Feb 2010 19:17:48 +0530, Nataraj S Narayan <natarajsn at gmail.com>
> wrote:
>> Jonas
>>
>>
>> #make distclean crosszipinstall CPU_TARGET=arm CROSSOPT='-CfSOFT -darm
>> -dFPC-ARMEL -gl'
>
> As I said multiple times, only OPT=-dFPC_ARMEL is needed. No -CfSOFT, no
> -darm, especially not in CROSSOPT.
> _______________________________________________
> fpc-devel maillist  -  fpc-devel at lists.freepascal.org
> http://lists.freepascal.org/mailman/listinfo/fpc-devel
>