[fpc-pascal] Generating RTL Units for STM32 Processors

R0b0t1 r030t1 at gmail.com
Wed Feb 28 03:22:39 CET 2018


On Tue, Feb 27, 2018 at 2:43 AM, Michael Ring <mail at michael-ring.org> wrote:
> The process is completely automated and is based on converting the header
> files that come in the CMSIS packages of the processors.
>

Excellent! What about the startup assembly files? I see an equivalent,
it is autogenerated too?

> I will send you the file for that chip via pm, you will also have to tweak
> compiler/systems/t_embed.pas compiler/arm/cpuinfo.pas but this is pretty
> straightforward, only extend both structs for the processors.
>

Yes, I forgot about this, but it does sound easy. Which chip?

> There is a second class of Headerfiles that were done half automated (afaik)
> by Jeppe Johansen that covers the STM32F7 series. Those Headers more closely
> match the STM32 code C-code examples but are a lot less portable to other
> chips (Microchip etc...)
>

Where are these?

I have some interest in exploring a wide variety of platforms with
FPC. When doing so using C, I have unfortunately found that
portability only half-exists between chips of the same family from the
same manufacturer.

My interest in FPC is partly an interest in increased portability, but
that may need to be achieved in some other way than a HAL. This may be
due to how peripheral mappings are supplied. Perhaps there is a better
way I do not know about. Large projects such as
https://github.com/qmk/qmk_firmware manage.

I will be following up with you off list, since you do not seem to mind.

Cheers,
     R0b0t1

> Michael
>
>
> Am 27.02.18 um 04:09 schrieb R0b0t1:
>>
>> Hello list,
>>
>> I'd like some pointers on generating the RTL files for a processor I
>> am interested in, the STM32L432KC (which is available for ~$15 with
>> JTAG on a "Nucleo" board from STMicroelectronics).
>>
>> The CMSIS (Cortex Microcontroller Software Interface Standard) files,
>> as they come from STM, use structures to represent the registers. The
>> example RTL files for STM devices seem to follow this pattern fairly
>> well, but I would like to know about any discrepancies; I opened one
>> file and think it was structured more closely to the way libopencm3
>> does things, but I can't find it again. This may have been the file
>> for the NXP part listed on the Wiki.
>>
>>
>> How much was converted by hand, and how much can be automated? M4
>> devices are noticeably more complicated, and even though this is a
>> hobby project I am worried about the time investment required to get
>> my device working with FPC.
>>
>> What complicates things is the way libopencm3 has their headers
>> structures is more standard. They avoid using structures that
>> represent the registers, instead using faux namespacing with lots of
>> underscores in macro names.
>>
>> Cheers,
>>       R0b0t1
>> _______________________________________________
>> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
>> http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
>
>
> _______________________________________________
> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal


More information about the fpc-pascal mailing list