[fpc-pascal] [OT] Pascal compiler for embedded platforms

Justin Smyth delphian at smythconsulting.net
Sun Mar 17 10:08:19 CET 2013


Rainer what board were using using for this below ?

-----Original Message----- 
From: Rainer Stratmann
Sent: Saturday, March 16, 2013 7:15 PM
To: FPC-Pascal users discussions
Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms

May be you can use STM32F...

That works for me with FPC.
http://j-software.dk/stm32f103.php

Am Saturday 16 March 2013 03:13:52 schrieb Justin Smyth:
> I'm using a LPC 1343 Microcontroller unit from waveshare, basically its a
> Cortex M3.
>
> the link for the board is -
> http://www.wvshare.com/product/Open1343-Package-A.htm
>
> I've now got STLInk V2 debugging kit , i want to debug this board in
> lazarus
>
>
> KInd Regards
>
> Justin
>
> -----Original Message-----
> From: Rainer Stratmann
> Sent: Saturday, March 16, 2013 6:28 AM
> To: FPC-Pascal users discussions
> Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms
>
> What kind of controller?
> Atmel AVR 8 bit?
> ARM 32 bit?
>
> For AVR it works good.
>
> Am Friday 15 March 2013 13:29:48 schrieb Justin Smyth:
> > I've tried to use mikropascal and not had any luck , i emailed them my
> > board i was going to use with the product and they said they didnt
> > support it.
>
> may be in the future...
>
> > I've now got a ST Link V2 for the debugging , if someone could give me 
> > an
> > idea how to set it up  , i would be great full.
> >
> > Kind Regards
> >
> >
> > Justin Smyth
> >
> > -----Original Message-----
> > From: Rainer Stratmann
> > Sent: Friday, March 15, 2013 9:30 PM
> > To: FPC-Pascal users discussions
> > Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms
> >
> > Am Friday 15 March 2013 10:40:15 schrieb Roberto P.:
> > > 2013/3/15 Rainer Stratmann <RainerStratmann at t-online.de>
> > >
> > > > For 32 bit ARM I would try to use freepascal.
> > > > I got it work somehow.
> > >
> > > any tip or guide would be appreciated, then.
> >
> > For me that is not easy. Most of the time I get it work somehow and
> > shortly
> > after I did not realize why ... :-)
> > I have suggestions to make something easier, but I am always facing
> > excuses
> > why it is good as it is, so I less take part of this type of discussions
> > which are exhausting for me.
> >
> > > > > I'm just a little afraid of the potentially limited maturity of
> > > > > these.
> > > >
> > > > What do you mean exactly with that?
> > >
> > > I mean that (maybe) both FPC and mikroePascal are young products for
> > > the embedded world, so that I might be facing compiler or  library
> > > propblems during the devlopment, besides my own project problems.
> >
> > May be mikroe is not providing the sourcecode (I am not sure), but they
> > have for nearly everything a solution. Ethernet, FAT, SPI, SD-Card, USB,
> > HTTP, TCP, etc...
> > There were problems in the past, but because they are (heavily) busy 
> > with
> > that
> > stuff they solve most of the important problems. And I think they are
> > honest.
> > _______________________________________________
> > fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> > http://lists.freepascal.org/mailman/listinfo/fpc-pascal
> >
> >
> > _______________________________________________
> > fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> > http://lists.freepascal.org/mailman/listinfo/fpc-pascal
>
> _______________________________________________
> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> http://lists.freepascal.org/mailman/listinfo/fpc-pascal
>
>
> _______________________________________________
> fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
> http://lists.freepascal.org/mailman/listinfo/fpc-pascal


_______________________________________________
fpc-pascal maillist  -  fpc-pascal at lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-pascal 





More information about the fpc-pascal mailing list