[fpc-devel] Synapse hangs in ARM-Linux

Michael Schnell mschnell at lumino.de
Wed Jan 30 10:04:12 CET 2013


On 01/28/2013 08:03 PM, waldo kitty wrote:
>
> i'm trying to make sure i'm following along here because i'm also 
> using synapse for a project...
Do you know where to find the Synapse "Powers" ? I do hope (and feel) 
they are interested in helping to make this work and fix potential 
problems in the Synapse code.

This is why I upgraded to the most recent svn sources of Synapse (and 
found that it obviously is not yet tested on ARM: it does not compiled 
without a (simple) modification).

Here are my latest finding:

  - I set the ConnectTimeout property and I set the other timeouts by 
calling "SetTimeout".
  - As described my project does perform two complete HTTP 
communications with the target successfully.
  - With the third access, the "connect" does work even without a 
timeout and a retry performed by my software  (Synapse Status log: "7" = 
HR_CanWrite /  "5" = HR_Connect).
  - then it does "11" = HR_WriteCount is shown, supposedly indicating my 
write request. and "13" = HR_Error seems shows that a timeout error on 
that Write occurred.
  - my latest log shows that the timeout occurs after more than 15 
Minutes (see below).
  - my software does a retry and the same happens again.

Now the "extended" Timeout is one problem, but the primary problem is 
why this write HTTP access does not work, while the previous two 
accesses do work fine.

How do we proceed ?

Thanks,
-Michael


------------------------------------------------------------------------


 >>>29-1-13 23:00:13>>>3:
 >>>29-1-13 23:00:13>>>0:192.168.71.252:80
 >>>29-1-13 23:00:13>>>1:192.168.71.252:80
 >>>29-1-13 23:00:13>>>2:IPv4
 >>>29-1-13 23:00:13>>>7:
 >>>29-1-13 23:00:13>>>5:192.168.71.252:80
 >>>29-1-13 23:16:37>>>11:5616
 >>>29-1-13 23:16:37>>>13:110,Connection timed out
 >>>29-1-13 23:16:37>>>6:
 >>>29-1-13 23:16:37>>>10:5663
 >>>29-1-13 23:16:37>>>3:
 >>>29-1-13 23:16:37>>>0:192.168.71.252:80
 >>>29-1-13 23:16:37>>>1:192.168.71.252:80
 >>>29-1-13 23:16:37>>>2:IPv4
 >>>29-1-13 23:16:37>>>7:
 >>>29-1-13 23:16:37>>>5:192.168.71.252:80
 >>>29-1-13 23:33:12>>>11:5382
 >>>29-1-13 23:33:12>>>13:110,Connection timed out
 >>>29-1-13 23:33:12>>>6:
 >>>29-1-13 23:33:12>>>10:5638
 >>>29-1-13 23:33:12>>>3:
 >>>29-1-13 23:33:12>>>0:192.168.71.252:80
 >>>29-1-13 23:33:12>>>1:192.168.71.252:80
 >>>29-1-13 23:33:12>>>2:IPv4
 >>>29-1-13 23:33:12>>>7:
 >>>29-1-13 23:33:12>>>5:192.168.71.252:80
 >>>29-1-13 23:48:47>>>11:4095
 >>>29-1-13 23:48:47>>>13:110,Connection timed out
 >>>29-1-13 23:48:47>>>6:
 >>>29-1-13 23:48:47>>>10:498
 >>>29-1-13 23:48:47>>>3:
 >>>29-1-13 23:48:47>>>0:192.168.71.252:80
 >>>29-1-13 23:48:47>>>1:192.168.71.252:80
 >>>29-1-13 23:48:47>>>2:IPv4
 >>>29-1-13 23:48:47>>>7:
 >>>29-1-13 23:48:47>>>5:192.168.71.252:80



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freepascal.org/pipermail/fpc-devel/attachments/20130130/92bc128e/attachment.html>


More information about the fpc-devel mailing list